TEL:+8617163667888
| Working principle of through type engineering car washing machine |
| 1.The direction of the equipment entering the vehicle first uses the first swing water knife high-pressure water mist spraying device to comprehensively and flawlessly soften and wash the coal slurry attached to the vehicle tires and body sides, in order to reduce adhesion. |
2.The vehicle enters the second swing water high-pressure flushing, causing attachments (such as coal ash, coal slurry, etc.) to fall off with the high-pressure flushing of the sprayed water, meeting the cleaning requirements; The high-pressure nozzle at the bottom thoroughly cleans the mud and sand on the flat and side surfaces of the tire |
| 3.After the vehicle enters the high-pressure cleaning area of the third swing water jet, the left and right high-pressure water jet devices set on both sides are activated by light sensing to thoroughly clean and drop the residual mud and sand from the vehicle tires, meeting the cleaning requirements |
| 4.After leaving the cleaning area, enter the shaking and drying area. The tire parts pass through the bump belt device, forming the principle of up and down bumps, forcing the residual water on the vehicle body to shake down and achieve the drying effect; At the same time, the fans on both sides are started to air dry vigorously.。 |
| 5. After all homework is completed, the vehicle drives out of the work area at a constant speed, and a cleaning process ends. The system enters the waiting program. |
 |  | |